No matter how good the centrifugal fan is, these problems can occur over time. To solve the problem of internal friction, it is first necessary to understand what causes the internal friction of centrifugal fans. In fact, this factor can be roughly divided into three parts:
The first factor, due to thrust, leads to tilting or wear, resulting in internal friction.
The second factor is that the inclination of the centrifugal fan impeller and the casing of the centrifugal fan cause collision friction, or the hardness of the car casing is poor, causing back and forth movement, causing friction.
The third factor is the friction generated when a deviation of the fan impeller collides with the intake ring.
Everyone knows that friction caused by the above reasons can be resolved.
1. Repair the inference sleeve or replace it with a new bearing.
2. The centrifugal fan impeller and thrust pad were repaired together and tested, achieving satisfactory results.
3. Repair the inlet ring of the centrifugal fan impeller until the collision and friction sound disappear.
Jun 07, 2023Leave a message
How to solve the internal friction problem of centrifugal fans
Send Inquiry











