High Cfm Dc Fan 50F Series

best 12v dc fan for heater

Send Inquiry

Add To Inquiry

Product Introduction

Best 12v dc fan for heater

Feature of high cfm dc fan 50F series

Impeller Diameter: 50mm
Bearing Type
Sleeve or Ball Bearings
Material
Impeller : Cast Iron
Frame : Aluminum Alloy
Motor
Impedance Protected

Lead Wire:
UL type or Equivalent, Red+, Black-
Storage Temperature:
-40℃ to +80℃(5%-90%RH)
Operating Temperature:
-10 C° +70 C° (5%-90%RH)
Life Expectance
30000hours (Sleeve Bearing)
80000hours (Ball Bearing)

Dimension drawing of high cfm dc fan 50F series

P & Q CURVE

Specifications Parameter

MODEL	Size(mm)			Rated Voltage	Rated Current	Speed	Maximum Air Flow		Maximum Air Pressure	Noise	Weight
PART NO.	A	B	C	VDC	Amp	R.P.M	m 3 /min	CFM	mmAq	dB-A	g
YB50F098108143H12D	98	108	143	12	0.22	2800	0.9	31.82	3.3	39	320
B50F098108143H24D				24	0.12
B50F198208260H12D	982	082	60H	12	0.60	2500	2.5	88.38	4.3	46	600
YB50F198208260H24D				24	0.40
YB50F248258305H12D	248	258	305	12	0.42	2450	3.4	120.19	4.1	46	650
YB50F248258305H24D				24	0.55
YB50F298308360H12D	298	308	360	12	0.65	2400	3.5	123.73	4	46	700
YB50F298308360H24D				24	0.40
YB50F358368420H12D	358	368	420	12	0.75	2300	3.7	130.8	3.6	45	770
YB50F358368420H24D				24	0.45
YB50F418368420H12D	418	368	420	12	0.80	2000	4	141.4	3.2	46	850
YB50F418428472H24D				24	0.50

Typical Solution

The most prominent feature of a cross-flow fan is that the fluid flows through the fan impeller twice, flows in along the radial direction, and then flows out along the radial direction. The inlet and exhaust directions are in the same plane, and the exhaust gas is evenly distributed along the fan width. Because of its simple structure, small size, high dynamic pressure coefficient and a long distance, widely used in laser equipment, air conditioning, air curtain equipment, dryer, hair dryer, home appliances and grain combine harvester.