Nov 10, 2022Leave a message

Easy selection of cooling fan in three steps

Many manufacturers consider too many factors when choosing a cooling fan to heat the equipment, and do not know which factor is the most important for the equipment. Choosing a suitable cooling fan can not only effectively cool the equipment, but also have an important impact on the service life of the cooling fan.

 

For example, when the air volume of the selected fan is insufficient to dissipate heat to the equipment in time, not only the normal operation of the equipment is affected, but also the service life of the fan is affected.

 

For another example, outdoor working equipment needs cooling fans to support waterproof function, and different grades also have salt spray prevention. The life of fans that can not meet the outdoor working environment can not be guaranteed, and maintenance also affects the operation of equipment. The following three steps are easy to select appropriate cooling fans.

 

1. Voltage selection: because the electrical environment and internal circuit design of different equipment are different, the power supply voltage of the cooling fan shall be determined first. Each manufacturer has many DC fans and AC fans, but the size of the DC fan is more than that of the AC fan. DC 12v, 24V, 48v are preferred to increase the selectivity.

 

2. Fan size. In consideration of the fan size, the fan size should be considered at the beginning of the design of the equipment. Axial flow cooling fans are generally square. If the reserved size of the equipment is rectangular, it is recommended that the length should be twice the width. In this way, two fans can be designed to be used side by side. Fan thickness is also an important factor. The reserved thickness can be appropriately increased when the heating capacity of the equipment is large, which will not be limited in the subsequent fan selection.

 

3. Support functions. Different devices need fans to support different functions, which can optimize the cooling effect of the cooling fan (energy saving, noise, heat dissipation, life span), and greatly reduce the cost of later maintenance. First, the functions include speed regulation, temperature control, monitoring, alarm, soft start, over-current protection, LED, high and low level conversion. In terms of characteristics, dust-proof and waterproof ip65,67,68, salt fog prevention, anti-interference, anti surge, noise value, etc.

 

Conclusion: The power supply voltage, size and functional requirements are mainly considered for the selection of cooling fan. If the cooling fan manufacturers have provided corresponding parameters when it comes to different air volume requirements of the same size, it is not a major concern.


FD126015LB

Send Inquiry

Home

Phone

E-mail

Inquiry