The latest statistics from the National Energy Administration show that by the end of 2010, my country's newly installed wind power capacity was 16 million kilowatts, and the cumulative installed capacity reached 41.827 million kilowatts, ranking first in the world.
However, under this good situation, relevant experts pointed out that there are hidden dangers in the lightning protection of wind turbines in my country.
Why are wind turbines vulnerable to lightning strikes?
Since the completion and operation of the Red Bay Wind Farm in my country, there have been many lightning strikes. According to statistics, the strike rate of blades is as high as 4%, and the strike rate of other electrical components is as high as 20%. Known as the "pioneer of China's wind power development", the southeastern Guangdong island of Macao is prone to lightning strikes almost every year.
"Although there is a set of strict technology for lightning protection of wind turbines, when encountering direct lightning, wind turbines can only 'get it off their hands'. At present, it is very difficult and costly for the wind power sector to prevent direct lightning. "Yi Yuechun, director of the new energy department of China Hydropower Engineering Consulting Group, told reporters.
Wind turbines work in the open air and are inevitably affected by natural disasters. Due to the rapid development of modern science and technology, the single-unit capacity of wind turbines is getting larger and larger, and the power generation of a modern wind turbine is 100 times more than that of 20 years ago. In order to absorb more energy, the height of the hub and the diameter of the impeller are increasing, and the risk of being struck by lightning is also increasing.
Guan Xiangshi, a famous lightning protection expert, believes that there are three reasons why wind turbines are in the predicament of lightning strikes: wind turbines are large and are generally located on the coast, hills, ridges and even the sea. For more wind energy, wind turbines are generally set at a commanding height higher than the surrounding area, which is more likely to attract lightning; upward lightning threatens the wind turbine, which will cause upward leading lightning strikes to the thundercloud, and the wind turbine will "actively meet" the lightning flash. .
Counting down the "three deadly sins" of lightning strikes
According to people's general understanding of lightning, there is a good grounding device below, there is a metal object above that can intercept lightning flashes, and there is a conductor between the top and bottom that leads down the lightning, which has the effect of lightning protection.
However, due to the large size of the wind turbine, the most common lightning protection method, the lightning rod, is powerless in front of it. The lightning protection system must be integrated with all parts of the wind turbine, and at the same time, the lightning current can be safely introduced into the ground from the lightning strike point without interfering with the operation of the unit.
It is precisely because of the particularity of wind turbines that the "three deadly sins" caused by lightning strikes to wind turbines.
The first case, the huge blade is easy to attract lightning. Guan Xiangshi explained that the blades of wind turbines are the "first target" of lightning strikes, and they are also a major difficulty in lightning protection of wind turbines. A typical wind turbine has two to three blades, up to 100 meters in diameter, and the blades rotate more than 100 meters above the ground. In order to reduce the weight of the current blades, insulating composite materials are generally used as load-bearing components, such as glass fiber reinforced plastics, wood laminates, etc. This material cannot conduct lightning current and is very easy to be damaged by lightning strikes. It is reported that according to the cost of replacing the blades after a lightning strike, the hoisting cost of replacing a blade of a unit is about 1 million yuan, and the cost of a blade is about 300,000 to 400,000 yuan. Accumulate all the costs and replace a unit. The direct cost of one of the blades is 1.5 million yuan, not to mention the loss of power generation during replacement.
In the second case, lightning strikes can easily damage the control system of the wind turbine. When the wind turbine is struck by lightning, even if the blades are not damaged, the lightning may enter the "central nervous system" through the electronic signal transmission line and power transmission line of the wind turbine, that is, the most sensitive and "delicate" part in the unit - the control system . Lightning strike statistics on various parts of wind turbines obtained from Germany and Denmark show that in all reported lightning strikes in both countries, lightning-induced damage to control systems is as high as 40 to 50 percent.
The third case is that lightning flashes will affect the quality of electrical energy. At present, due to the lack of breakthroughs in wind power and energy storage technology and the inability to output electricity smoothly, some people have called wind power "garbage power". One of the reasons for this is that lightning causes current and voltage instability in wind power generation.
Wind power lightning protection is in urgent need of technical and regulatory specifications
Although the risk of lightning strikes is like a time bomb, which may cause fatal damage to wind turbines at any time, the relevant departments still do not pay much attention to the lightning protection of wind turbines.
Some experts admitted that some wind power projects are launched one after another, and the first consideration is not the safety issue, but the economic benefit issue. Few companies consider lightning protection factors before the project starts; a secondary issue.
As far as the current technology is concerned, my country's understanding of the mechanism of lightning strikes is relatively lacking, especially compared with countries such as Europe and the United States where wind power development is relatively early, the research on lightning protection of wind turbines in my country is relatively lagging behind, so some wind power investment The lightning protection technical services recognized by the party and the construction party are still limited.
"Lightning protection is like flood control. The principle is to provide a low-impedance channel for lightning current, and at the same time, internal lightning protection measures are taken to reduce or reduce damage to electrical and electronic systems." Guan Xiangshi told reporters that experts have developed a new type of lightning protection. Lightning protection blade, a metal ring and a metal wire are inserted into the top and middle of the blade to lead the lightning current from the lightning strike point to the blade root to the ground. In addition, for the control system, the lightning current can be leaked into the ground by installing a low-voltage power supply lightning protector.
In addition, there is no technical standard for lightning protection and overvoltage protection of wind turbines in my country, and there is no unified testing standard, which is one of the important reasons why wind turbines are repeatedly struck by lightning.
"Different companies vary widely in lightning protection grounding design, the size of the grounding resistance, and the quality of lightning protection products. For example, the grounding resistance of wind turbines should be less than 4 ohms, but some projects reach more than ten ohms. It is precisely because our country is The lightning protection standards for wind power generation have not been issued for a long time, resulting in no unified standard for testing and certification of lightning protection facilities for wind turbines." Yi Yuechun said.
In this regard, Guan Xiangshi also expressed the same concern: "The management department has no corresponding laws and regulations to follow, and the testing department has no standards to follow. Although some companies specializing in lightning protection have done some work, the level and quality are uneven. ."
As for the problem of wind turbines, Wang Zhizhong, a wind power expert and professor of Beijing Jiaotong University, said that in the process of introducing foreign wind turbines, my country must improve the lightning protection and overvoltage design of the turbines. "This is only a matter of time. Wind power lightning protection grounding construction process Very professional and must follow relevant standards.”
Some experts revealed that at present, the national standard "Lightning Protection for Wind Turbines" jointly issued by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the National Standardization Administration is in the process of being submitted for review. Experts hope that "Lightning Protection for Wind Turbines" will become the national standard for lightning protection of wind turbines in the near future, and properly solve the problem of lightning protection of wind power from a technical level.











