Feb 17, 2023Leave a message

Noise may also occur if the cooling fan is installed incorrectly


The noise problem of the cooling fan is a common problem. Some are the quality problems of the cooling fan itself, and some are the installation problems of the cooling fan. Therefore, the correct installation of the cooling fan is also very important
1. The installation method of clamping the frame of the cooling fan up and down is easy to amplify the sound due to the vibration of the cooling fan during operation, production resonance, and it is impossible for the cooling fan running at high speed to have no vibration.
2. The way of inversion is adopted, with the fan blade facing down and absorbing heat from bottom to top. The oil-type cooling fan may exceed the height of the outer frame due to the gravity of the fan blade itself, and may encounter the lower cooling fin, causing noise (it can be well solved by changing to double ball bearings)
3. Incorrect installation of locking screws. The first screw is too strong and locked tightly. The second screw in parallel is also locked tightly. Then lock the two opposite screws again. This will cause the fan outer frame to deform and twist, and the fan blade may touch the outer frame wall to produce a scratch sound. The right thing to do is to lock the first screw, and then tighten it. Don't lock it out of shape. After that, lock the diagonal screw, and then lock another set of diagonal screws

Send Inquiry

Home

Phone

E-mail

Inquiry