May 10, 2023Leave a message

Maintenance method for AC cooling fan


After using the AC cooling fan for a period of time, it needs to be maintained and maintained, so that it can be used for a long time and have a standard lifespan. What are the tips for maintaining an AC cooling fan? The editor of Jiance Cooling Fan will share with you.
The maintenance methods for AC cooling fans are as follows:
There are a wide variety of AC cooling fans, and here we mainly introduce small AC fans used for electronic product cooling. Widely used in the home appliance industry, mechanical industry, manufacturing equipment industry, and other products with ventilation and heat dissipation requirements.
The motor structure of the AC cooling fan is a cover level motor, with the rotor and impeller fixed as one unit. The air duct, positioning frame, and stator are integrated. This type of structure is simple, easy to produce, and very convenient to install and use.
Jiance cooling fan
Maintenance tips for AC cooling fans:
1. Open the shell of the device, then turn on the AC fan, turn off the power supply of the device, use an air gun 2cm away from the fan, and blow the fan; Then use industrial alcohol to wipe the dirt on the fan blades, tilt the body to adjust the gap position, and then use an air gun to blow out the dust inside the equipment. From the front of the device to the back of the device, it needs to be cleaned and then rotated repeatedly until it is clean.
The wind speed of the AC cooling fan is determined by various factors, and the two important reasons are the bearings of the AC fan,
Ball bearings: The long-term oxidation of air ions and the accumulation of dirt and dust in the bearings can lead to an increase in the friction resistance of the bearings, resulting in a gradual decrease in the speed of the fan.
Oil bearing: The AC fan with oil bearing mainly relies on the mutual friction between the stator and the coil to rotate, and the oil inside the bearing gradually decreases with the use of the fan, continuous operation, and time consumption, resulting in slower and slower wind speed when using the fan for operation.
3. The lifespan of AC fans varies depending on the usage environment. Assuming working in a standard environment, the lifespan of a typical AC ball fan is around 50000 hours, and the products of different cooling fan manufacturers may also differ. A typical AC oil bearing fan has a lifespan of 25000 hours,
4. Due to the repeated rotation of its bearings, wear and tear will shorten its lifespan, and the lifespan of high-quality manufacturers will reach 30000 to 35000 hours; The equipment needs to be cleaned thoroughly, at least once a month. The air inlet network should be kept clean to prevent obstruction of airflow, which can be cleaned with a soft bristle brush or compressed air.

Send Inquiry

Home

Phone

E-mail

Inquiry