How to install the cooling fan?

1. Prepare the cooling fan and align the four fans with the four cooling fan fixing holes on the motherboard.
2. Press down the bottom foot of the cooling fan again and pull it out to see if it can be easily pulled out. If it indicates that it is not stuck properly, check again.
Note: Do not press when the fixing holes are not properly aligned, as this will damage the feet of the cooling fan.
3. After entering the fixing holes on the motherboard, press down the four pin cards on the fan.
Note: To press the clip diagonally.
4. After pressing off the fixing clips of the cooling fan, check again to see if the four pins of the fan are attached to the motherboard. Then, connect the cooling fan to the power supply.
Note: There are several fan power interfaces on the motherboard, which should be connected to the marked ones: CFNA or CPU_ On the FAN interface.
The above are the accurate steps and methods for installing a cooling fan. If you follow the above instructions, you will definitely install the cooling fan completely and completely