AC external rotor centrifugal fans play an important role in engineering construction, especially in tunnel construction, where axial flow fans are often required for ventilation. When installing an AC outer rotor centrifugal fan, it is very important to understand the flow direction of the AC outer rotor centrifugal fan. So, does the AC outer rotor centrifugal fan blow inward or outward? Here is the answer.
Use an AC external rotor centrifugal fan to exhaust air to the outside, and there is also a need for supplemental air, which is ventilation. If the room is well sealed, installing an AC outer rotor centrifugal fan will not exhaust much air. If an AC external rotor centrifugal fan is used to exhaust air outdoors and supplement fresh air indoors through natural air flow, it is called negative pressure ventilation.
The front deflector+impeller stage fan has a fixed front deflector with adjustable blade mounting angle at the front end of the impeller. So as to generate a negative winding speed before the impeller inlet, while the winding speed of the air flow at the impeller outlet is zero. The front deflector worsens the velocity and pressure fields of the impeller inlet airflow, and increases the value of the impeller average relative velocity, resulting in increased fan losses and reduced efficiency. In addition, the noise of this type of explosion-proof AC outer rotor centrifugal fan has also increased.
■ Working principle
The ordinary AC external rotor centrifugal fan can be used for ventilation in general factories, warehouses, offices, residential areas, and other places, as well as for forced ventilation of air coolers (air coolers), evaporators, condensers, and so on.
The anti-corrosion and explosion-proof AC external rotor centrifugal fan adopts anti-corrosion materials and explosion-proof measures, and is matched with an explosion-proof motor. It can be used as a general purpose ventilation and ventilation equipment in places with explosive, volatile, and corrosive gases.
It is required that the gas conveyed by the AC external rotor centrifugal fan should be free of significant dust, viscosity, and fibrous substances; The temperature of the directly connected motor shall not exceed 40 ℃, and the temperature of the belt drive type shall not exceed 60 ℃.
The AC outer rotor centrifugal fan is mainly composed of impeller, casing, motor, and other components. The support is connected to the casing air duct using profile steel. The impeller and casing of the anti-corrosion AC external rotor centrifugal fan are made of fiberglass, while other types of AC external rotor centrifugal fans are generally made of steel plate.
■ Technical parameters
Smoke exhaust fan, centrifugal fan, mixed flow fan, fire fan, fan manufacturer, AC external rotor, centrifugal fan, parameters
T35-11 axial flow fan
Machine No.: 2.8 # - 11.2 # Air volume: 826-67892m3/h Air pressure: 39-483Pa
Features: Twisted blade, high wheel hub ratio, low wind resistance motor bracket, large air volume, high wind pressure, low power consumption, new type, high efficiency, energy-saving, and can be made into explosion-proof and anti-corrosion types
Application: Ventilation and ventilation of factories, warehouses, office buildings, residential buildings, entertainment places, etc
Users need to arrange professional personnel to ensure that the installed fan reaches the working state when installing the AC outer rotor centrifugal fan in strict accordance with the process steps in the manual. In this way, only when the fan itself has a good structure in all aspects can it present a very good performance.
Explosion-proof T35-11 AC external rotor centrifugal fan is applicable to hazardous areas in hazardous gas environments: Zone 1 and Zone 2. The fan impeller and housing are made of fiberglass composite material. This series of fans has the characteristics of simple structure, low noise, easy installation, good anti-corrosion performance, high static pressure and efficiency, stable operation, and small mechanical vibration. The transported gas shall not contain viscous substances, dust and hard particles ≤ 150mg/m3, humidity shall not exceed - 20-60 ℃, and relative humidity ≤ 100%.
Glass fiber reinforced plastic AC external rotor centrifugal fan, namely, fan rainproof elbow, generally available in three types: 45 degrees, 60 degrees, and 90 degrees. In fact, a certain degree of silence is crucial because of the effect achieved. However, most customers will choose 60 degrees. Based on our experience and customer feedback, 45 degrees are somewhat small, resulting in poor rain protection, while 90 degrees elbows are too heavy. In addition, when the wind blows, the size of the windward plane or object surface is large, and the joint with the fan flange is prone to damage.
2. Small size, light weight: Compared to centrifugal fans with the same air volume, it takes up two-thirds less space and reduces weight by more than half. 3. Simple structure: The fan consists of five main parts. ① Impeller ② motor ③ internal circulation air cooling system ④ guide vane, inner cylinder ⑤ outer cylinder. Convenient disassembly and maintenance.
Method: Repair and replace the bearing.
In summary, AC external rotor centrifugal fans can achieve the effect of blowing inward or outward depending on the type. This divides axial flow fans into positive pressure axial flow fans and negative pressure axial flow fans. Be sure to pay attention to this during installation, otherwise the expected ventilation effect will not be achieved.
Mar 25, 2023Leave a message
Does the wind of the AC outer rotor centrifugal fan blow inward or outward
Send Inquiry











