Basic Introduction To High Pressure Suction And Supply Fan

When we buy fans from the fan manufacturer, we will find that the variety of fans is unimaginable. One type of fan is called a high-pressure suction fan. This kind of wind turbine sounds exciting from its name. So what exactly is it about? The following will be explained by the manufacturer of high-pressure suction and supply fans.
High pressure suction and supply fan refers to a new type of fan that was improved and designed on the basis of BT30-11 in China in the 1980s. It is suitable for transporting flammable, explosive, and non corrosive gases, with an ambient temperature not exceeding 60 ℃. It is widely used for ventilation or strong heating in general factories, warehouses, offices, and residential buildings. It can also be installed in series with long exhaust pipes spaced apart to increase the pressure in the pipes. When the motor is removed, it can be used as a free fan.
It is suitable for transporting flammable, explosive, and non corrosive gases, with an ambient temperature not exceeding 60 ℃. It is widely used for ventilation or strong heating in general factories, warehouses, offices, and residential buildings. It can also be installed in series with long exhaust pipes spaced apart to increase the pressure in the pipes. When the motor is removed, it can be used as a free fan. The anti-corrosion axial flow fan (FT35-11 type) is made of anti-corrosion material coated with epoxy paint. The motor uses a special anti-corrosion motor for transporting corrosive gases. High pressure suction and supply fan (BT35-11 type), used for conveying flammable and explosive gases. Suitable for environments with temperature groups T1 to T4; The impeller is made of aluminum alloy to prevent sparks during operation. The motor is of flameproof type. The performance parameters and overall dimensions of the FT35-11 and BT35-11 fans are the same as those of the T35-11 fans. The fan needs to be equipped with bracket feet and motor voltage. Please indicate when ordering.
1. Before installation, carefully check whether the fan is damaged or deformed. If there is any damage or deformation, it can be installed only after it is properly repaired [2].
2. During installation, attention should be paid to checking whether all connecting parts are loose, and the clearance between the blades and the air duct should be uniform and not collide.
3. The weight of the connecting air outlet pipe should not be borne by the fan's air duct, and additional support frames should be added during installation.
4. An air collector must be installed at the air outlet end of the fan, and it is desired to install a protective net.
5. The fan base must naturally engage with the foundation plane, and it is not allowed to forcibly connect the base by knocking to prevent deformation of the base. During installation, the base should be corrected, padded with iron sheets, and kept in a horizontal position, and then the foundation bolts should be tightened.
6. After installation, experiments must be conducted first, and only after the operation is normal can it be officially used.
In summary, we can know from the explanation given by the manufacturer of high-pressure suction and delivery fans that high-pressure suction and delivery fans can carry flammable and explosive gases due to their unique design, so they play a very important role in some chemical industries. If you have a demand for high pressure suction fans, remember to find a qualified manufacturer of high pressure suction fans to purchase.