May 10, 2023Leave a message

Will You Gain A New Understanding Of DC Cooling Fans Through This Article?


The DC fan thermal fan is actually widely used in our daily lives, but many people find it difficult to name it in full, do not know its type, how to choose plastic materials and colors for fan frames and blades, and do not know its rotational speed and working principle. Today, the editor will provide a detailed explanation for areas that everyone is not familiar with.
A DC cooling fan refers to a cooling fan powered by a DC power source. Its operation changes with the amount of heat and operates at a slower speed. The DC fan will produce less noise and consume less energy. In most design requirements, the air temperature is usually lower than the maximum design temperature after the DC cooling fan runs at an increased speed for several hours. Let me give you a comprehensive introduction to the DC cooling fan, so that you can have a better understanding and understanding of it.
1、 The types of DC cooling fans are:
1. Mixed flow: With the above two airflow modes.
2. Axial flow: The direction of the airflow outlet is the same as the axis direction.
3. Centrifugal: Using centrifugal force to swing the airflow outward along the blades.
2、 The composition of a DC cooling fan: fan frame, fan blades, bearings, PCB control circuit, and drive motor.
3、 DC cooling fan frame and blade plastic material and color selection:
1. Fan frame+fan leaves: made of PBT raw material in black (plastic hot deformation temperature 230 ℃)
2. Fan frame+fan blade: transparent PC raw material (plastic thermal deformation temperature 120 ℃)
3. Fan frame+fan leaves: PBT raw material white (plastic hot deformation temperature 230 ℃)
4、 Speed: Speed refers to the speed at which a fan rotates, usually measured in revolutions per minute, i.e. rpm. The rotational speed is related to factors such as the number of turns of electromechanical winding, wire diameter, outer and bottom diameters of fan blades and impellers, blade shape, and bearings used. As the rotational speed increases, the air volume correspondingly increases.
5、 Working principle of DC cooling fan: According to the right-hand rule of amperes, a conductor passing through an electric current will generate a magnetic field around it. If this conductor is placed in another fixed magnetic field, it will generate suction or repulsion, causing the object to move. A rubber magnet pre filled with magnetism is attached to the blade of the DC cooling fan. Surrounding the silicon steel sheet, two sets of coils are wound around the axis, and a Hall sensing component is used as a synchronous detection device to control a set of circuits that rotate the two sets of coils wound around the axis. Silicon steel sheets generate different magnetic poles, which generate attraction and repulsion forces with rubber magnets. When the suction and repulsion force is greater than the static friction force of the lice fan, the fan blades naturally rotate.

Send Inquiry

Home

Phone

E-mail

Inquiry