Miniature high-pressure fans play a very important role in our life and production, so it is very important for our production and life to purchase appropriate miniature high-pressure fans. However, we may have some misunderstandings and misunderstandings when purchasing micro high pressure fans. Here are some precautions when purchasing micro high pressure fans.
For customers who buy cooling fans for the first time, they often underestimate the risk of cooling fans, especially for those that do not form specifications. After purchasing, they look at the label and think the appearance is almost OK. But when they ship, the customer reports that there is a problem with cooling fans. How should we control and test those parameters when they come in
Serious items: test whether the cooling fan operates normally, whether the spacing of screw holes, the size of screw holes, the length of wires, and the specification and direction of terminals meet the specifications.
Important items: whether the current and rotating speed meet the requirements, whether there is abnormal noise during operation, and whether the cooling fan can be started at low voltage.
Minor items: appearance items
As we all know, most of the outer frame and fan blades of the DC cooling fan are molded with PBT plastic materials. Some customers who have contacted plastic products will see that the fan blades are thin, long and large when they get the fan from the cooling fan manufacturer. They will break the fan blades habitually. It is unexpected that the blades of the cooling fan will break with a little force, and then say, your cooling fan quality is not good
We all know that the toughness of PBT is not very good, and the contact area of the plastic part of the fan blade and the round rotor in the middle is very small, especially for some micro fans, such as 6mm and 7mm. Due to the thickness requirements of the cooling fan, the fan blade itself is very thin, and the contact area is small, so do not break it by hand, and it is very likely to break when it falls to the ground one meter. Of course, for the 12CM cooling fan, such as 12038, It still takes a lot of strength to break it, because its carved leaves are thick and the contact area is larger
If the small size cooling fan can not be easily broken, it is much better to change it into PC material. It is a kind of soft material, easy to deform, but not easy to break. Therefore, breaking the fan blade does not mean anything. It must not be used to determine the quality of the cooling fan
As we all know, false soldering is the most common problem of all electronic products, including cooling fans, and the most difficult problem to be solved by reworking. Because false soldering makes the cooling fans not rotate during processing, it is not easy to find it when customers assemble it. Jingyangda Technology has strict management on the problem of false soldering of cooling fans
First, in the production of cooling fan, spot check the temperature of soldering iron every 1 hour to ensure that the temperature of soldering iron is within the range of use
Second, add appearance inspection station at the last station of semi-finished motor production, mainly for the inspection of welding points
Third, during the finished product test, before listening to the noise, it is required to gently tap the corner of the cooling fan twice before the test station, and then test the electrical performance, in order to find more false welding problems after vibration
Fourth, if there is any problem that the cooling fan does not turn in the finished product QA spot check, the solution is to re-flow the whole batch, and then decide whether to re-flow it into the warehouse according to the re-flow results.
To sum up, it is not a simple matter to buy a miniature high-pressure fan. It is necessary to understand the material performance and structure of the miniature high-pressure fan. If you do not know it in advance, you may have some misunderstandings. The precautions for the purchase of micro high pressure fans introduced in the article may also point out some wrong understandings when you purchase micro high pressure fans.
Mar 11, 2023Leave a message
What Should Be Paid Attention To When Purchasing Micro High Pressure Fan?
Send Inquiry











