In the field of sewage purification and environmental treatment, fans play an important role. There are different types of fans, which need to be properly selected in different treatment processes. So what tips do we need to master about the selection of fans? The following is a detailed introduction by the micro fan factory.
Warehouse ventilation
First of all, to see whether the goods in storage are flammable and explosive goods, such as paint warehouse, you must select explosion-proof series fans.
Secondly, depending on the level of noise requirements, you can choose a roof fan or an environment-friendly centrifugal fan.
Finally, depending on the amount of air exchange required for the warehouse air, you can choose the most conventional axial flow fan SF type or exhaust fan FA type.
Kitchen exhaust
First of all, for kitchens that directly exhaust lampblack (that is, the exhaust outlet is on the indoor wall), SF axial flow fan or FA exhaust fan can be selected according to the size of lampblack.
Secondly, for kitchens with large oil smoke, which need to pass through long pipes and have bending treatment in the pipes, it is strongly recommended to use centrifugal fans (4-72 centrifugal fans are the most common, 11-62 low-noise environment-friendly centrifugal fans are also very practical), because the pressure of centrifugal fans is higher than that of axial flow fans, and the oil smoke does not pass through the motor, so it is easier to maintain and replace the motor.
Finally, it is suggested that the kitchen with strong lampblack should use the above two schemes together for better results.
High-grade places
For the ventilation of hotels, tea houses, coffee bars, chess and card rooms, karaoke halls and other high-end places, conventional fans are not suitable.
First of all, for the ventilation of the small room, if the ventilation pipe is connected to the central ventilation pipe, the FZY series small axial flow fan can be selected on the basis of considering the appearance and noise. It has a small size, plastic or aluminum appearance, and low noise and high air volume coexist.
Secondly, from the perspective of more stringent requirements on air volume and noise, the fan box is the best choice. There is a muffling cotton inside the box, and the noise reduction can be achieved after the central ventilation pipe is connected externally.
Finally, I would like to add that for indoor air blowing in the gym, it is necessary to choose the FS industrial electric fan with large air volume instead of the SF post axial fan. This is considered in terms of appearance and safety.
From the above contents, we can clearly understand some points that should be paid attention to when selecting fans. With this knowledge and a certain understanding of the product characteristics of fan manufacturers, it is not so difficult to select fans. The products produced by the famous miniature fan factory have excellent performance and can meet the needs in most cases.
Mar 15, 2023Leave a message
The General Method Of Fan Selection Introduced By Micro Fan Factory
Send Inquiry











