Jul 26, 2022Leave a message

Surge Protector According To The Working Principle

According to its working principle, SPD can be divided into voltage switching type, voltage limiting type and combination type.

⑴ voltage switching SPD. It presents high impedance when there is no transient overvoltage. Once it responds to lightning transient overvoltage, its impedance suddenly changes to low impedance, allowing lightning current to pass through, also known as "short-circuit switch SPD".

⑵ pressure limiting type SPD. When there is no instantaneous overvoltage, it is high impedance, but with the increase of surge current and voltage, its impedance will continue to decrease, and its current-voltage characteristic is strongly nonlinear, sometimes called "clamping SPD".

(3) Combined SPD. It is composed of voltage switching type components and voltage limiting type components, which can display the characteristics of voltage switching type or voltage limiting type or both, which depends on the characteristics of the applied voltage.


Send Inquiry

Home

Phone

E-mail

Inquiry