Dec 26, 2022Leave a message

How To Make The Fan Less Noisy

1, the use of ball bearings to reduce the noise of cooling fans, fans using bearings with oil, roller bearings, oil bearings in the early in the case of sufficient grease low noise, with the longer the use of grease evaporation, increase the gap between the stator and the rotor to produce more vibration and noise with a large, so the use of ball bearings will be better

2, reduce the speed to reduce the noise of the cooling fan, in the case of meeting the demand for heat dissipation to reduce the speed is more obvious to reduce the noise, you can also install two cooling fans to reduce the speed of half to reduce the noise, the air volume can be guaranteed

 

 

FD126025MB

3, the correct installation to reduce cooling fan noise, due to differences in the design and materials of the equipment, the correct installation can reduce the resonance of the equipment, the four corners of the fan must be in a plane, screw tightness should be the same strength, such as the installation position of the material easy to produce resonance noise, the installation of the four corners of the fan can be increased rubber and other cushioning pad

4, reduce the wind pressure to reduce the noise of the fan, here involves the fan itself and the design of the equipment, the fan itself, the fan blade design angle and smoothness, the overall design of the degree of concentration of the wind, equipment, whether blowing or sucking wind, and any parts of the same direction of the air duct as far as possible to reduce wind resistance design, such as the fan blowing wind through the radiator, the radiator at both ends of each piece can do tip design, which will reduce wind resistance.

 

 

Send Inquiry

Home

Phone

E-mail

Inquiry