Centrifugal fans are now a popular type among fans. Now, with the continuous development of new industrial and environmental protection fields, the application range of centrifugal fans is also constantly expanding. Small power frequency centrifugal fans are very common in engineering construction. What details should be paid attention to when storing and maintaining small power frequency centrifugal fans?
1. The use environment should always be kept clean, the fan surface should be kept clean, the air inlet and outlet should be free of debris, and dust and other debris in the fan and pipeline should be regularly removed.
2. The fan can only be operated when it is completely normal. Meanwhile, it is necessary to ensure that the power supply facilities have sufficient capacity and stable voltage, and it is strictly prohibited to operate with defects. The power supply line must be a dedicated line, and temporary lines should not be used for long-term power supply.
3. During the operation of the fan, if it is found that the fan has abnormal sound, the motor is seriously heated, the housing is electrified, the switch trips, and it cannot be started, it should be immediately stopped for inspection. In order to ensure safety, it is not allowed to conduct maintenance during the operation of the fan. After the maintenance, a trial run should be conducted for about five minutes, and it should be confirmed that there are no abnormalities before starting up and running.
4. Periodically supplement or replace the lubricating grease for the bearings according to the operating environment conditions (it is not necessary to replace the lubricating grease for the enclosed bearings of the motor during their service life). To ensure good lubrication of the fan during operation, the frequency of oil filling shall not be less than 1000 hours per time for the enclosed bearings and motor bearings. Fill 1/3 of the inner and outer rings of the bearings with zl-3 lithium based lubricating grease for oil filling; Running without oil is strictly prohibited.
5. The fan should be stored in a dry environment to avoid moisture from the motor. When the fan is stored in the open air, protective measures should be taken. During storage and handling, the fan should be prevented from being bumped to prevent damage to the fan.
After installing the centrifugal fan, before starting, check the flexibility of the fan's rotation and manually move the blades to see if there is any jamming or friction. Check whether there are any leftovers and other debris in the fan and adjacent pipes.
In summary, through the introduction of this article, we can understand what should be paid attention to when storing and maintaining small power frequency centrifugal fans. The usage rate of small power frequency centrifugal fans is high, and they are easily consumed. Therefore, we should pay more attention to these details when using and storing them, effectively extending the service life of small power frequency centrifugal fans.
Mar 22, 2023Leave a message
Guide For Storage And Maintenance Of Small Power Frequency Centrifugal Fans
Send Inquiry











