Aug 09, 2023Leave a message

Differences And Characteristics Between Forward-inclined Centrifugal Fans And Backward-inclined Centrifugal Fans

Front inclined centrifugal fan:

Production: made of high-quality steel plate press-folding

Advantages: low cost, low speed, thinner shafts and smaller bearings are available and a wide operating range. Disadvantages: the shape of the performance curve may be parallel to the pipe network resistance curve and the reduced static pressure of the system may lead to overloading of the motor. Also.

The blade structure is less strong and cannot be operated at higher speeds

Backward inclined centrifugal fans:

Fabrication: casting

Advantages: High efficiency and power curve without overload. Its power curve is usually maximized in the middle of the commonly used range, so that it is generally

not overloaded. The high structural strength of the blades and impellers themselves allows for use in higher static pressure systems. Low noise, high air volume, wide high efficiency zone

Differences and characteristics between forward-inclined centrifugal fans and backward-inclined centrifugal fans

Disadvantages: Because the impeller runs at a higher speed, it needs a thicker shaft and larger bearings and has higher requirements for balancing, in addition, fluctuations in static pressure can easily cause changes in working conditions.

(1) Due to the front tilting blade to the airflow of the absolute speed C is greater than the back tilting blade, so the kinetic energy of the airflow in the casing of the screw room

Conversion of kinetic energy into pressure energy loss is also larger, so the static pressure head to overcome the system resistance accounted for a small proportion. The absolute velocity C transferred to the airflow by the backward tilting blade is small, so the loss of airflow in the energy conversion is small, so the static pressure head used to overcome the resistance of the system accounts for a larger proportion.

(2) backward tilting blade fan in the channel is generally gradually expanding, and than the front tilting blade channel expansion is more moderate, in addition to the curvature of the backward tilting blade than the curvature of the front tilting blade is small, so the airflow in the backward tilting blade channel flow hydraulic loss than the front tilting blade is small.

Power consumption

The shaft power of the ventilator is expressed as: N=(rQH)/102η

N-Ventilator shaft power

Q-Ventilator air volume

H-Ventilator pressure head

η-efficiency of the ventilator

r-The volumetric weight of air

As can be seen from the above equation, the level of fan efficiency directly affects the size of the fan shaft power. The efficiency of the backward inclined blade fan is high, the fan requires less axial power and consumes less electrical energy. While the efficiency of the front inclined blade fan is low, the fan requires a large shaft power, consuming more electricity.

3、 Noise

Due to the front tilting blade to the airflow of the absolute speed C than the back tilting blade, so the airflow in the energy conversion of the loss is also larger, the airflow and casing collision speed is also larger, in addition to the back tilting blade channel curvature for the gently, the airflow is also more fluent. Therefore, the front inclined blade fan is noisier than the rear inclined blade fan.

 

Send Inquiry

Home

Phone

E-mail

Inquiry